50 mm PEEK head for all FOM coaters
- Coating width from 1 mm to 50 mm
- Fits all nine current FOM coating machines
- PEEK body for chemistries that attack stainless steel
In addition to that...
- Flatness tolerance of 10 µm or better
- PEEK body with a non-metallic wetted surface
- Standard and high viscosity versions
- Single manifold
- Stripe and patterned coating with custom shims
- Use with or without a meniscus guide
- Shims and meniscus guides shared with the Steel series
- Interchangeable with the Steel series FOM SD 50
System overview
The PEEK version of the FOM SD 50 coats widths from 1 mm to 50 mm in a PEEK body, for chemistries that attack stainless steel. It uses the same mounting interface, shims and meniscus guides as the Steel series FOM SD 50 and fits all current FOM coating machines.
The shim sets the coating width and the stripe pattern, and the meniscus guide stabilizes the bead. Where tighter flatness matters more than chemical compatibility, the Steel series FOM SD 50 is the alternative.

Datasheet
Technical data for the Steel series FOM SD 25 to SD 200 and the PEEK series, in one overview.
| Material | PEEK |
| Coating width | 1 mm to 50 mm |
| Dimensions (L × W × H) | 90 × 30 × 70 mm |
| Weight | 0.20 kg |
| Versions | Standard and high viscosity |
| Flatness | ≤ 10 µm |
| Shims & meniscus guides | Shared with the Steel series, 50 µm to 500 µm |
| Machine compatibility | All current FOM coating machines |
Frequently asked questions
What coating width does the FOM SD 50 PEEK head support?
The FOM SD 50 PEEK head coats widths from 1 mm to 50 mm. The width is set by the shim, so one head covers the full range.
Which FOM machines is the FOM SD 50 PEEK head compatible with?
The FOM SD 50 PEEK head fits all current FOM coating machines: nanoRC, scalarSC, vectorSC, alphaSC, photonR2R, omicronR2R, omegaR2R, compact moduloR2R and moduloR2R.
When should I choose a PEEK head over a steel head?
Choose PEEK when your chemistry attacks stainless steel, or when a non-metallic wetted surface matters for your formulation. Choose the Steel series when tighter flatness is the priority: 5 µm or better, compared with 10 µm for PEEK.
Can the FOM SD 50 PEEK head replace a steel head on the same machine?
Yes. It uses the same mounting interface, shims and meniscus guides as the Steel series FOM SD 50, so switching between the two needs no change to the machine.
Which versions of the FOM SD 50 PEEK head are available?
The head is available in standard and high viscosity versions.
Can the FOM SD 50 PEEK head coat stripes?
Yes. Patterned shims produce stripes and discrete coating areas. Standard, custom and bespoke patterns are available.



